2025 John Deere Golf & Sports Turf 9009A TerrainCut 

• Five, 27-in. independent rotary decks with a 9-foot cutting width
• Deep shell deck design with exclusive rear discharge chute
• No-tool notch system for easy height-of-cut adjustments
• LoadMatch™ for excellent climbing and cut quality

Features May Include: 

• Stamped rotary decks and rigid frame construction to maximize deck durability

The 9009A TerrainCut Rough Mower is equipped with five and the 7400A TerrainCut Trim and Surrounds mower is equipped with three 68.6-cm (27-in.) stamped rotary decks for superior productivity and strength. The rotary decks perform exceptionally well across a wide range of grass types, including warm- and cool-season grasses.

A strong stamped, 10-gauge shell construction is an integral part of this durable deck. The stamped design uses a single piece of steel to form the shell that provides consistent strength throughout all areas of the deck. This is the starting point of the strength and durability of the deck construction.

Surrounding the deck is a tough, steel frame designed to protect the deck shell. It all starts with the frame on top of the deck which is then bolted to the shell providing extra protection. The front and rear roller brackets are attached to the framework, so as the front and rear rollers encounter obstacles, the force is transferred through the frame rather than through the deck shell. This design also decreases the distance from the blade tip to outside edge of the deck for closer trimming around objects like trees and fences.

An angled skid plate between the front roller and deck shell helps protect the front lip of the deck from tough terrain such as tree roots or other objects. The skid plate helps move the deck over the object to prevent the front edge from contacting and damaging the deck shell. The side of the deck also has additional protection to increase durability with a 38-mm (1.5-in.) tall and 12.7-mm (0.5-in.) thick steel stock welded to the decks edge.

Roller brackets are cast steel with extended housings to effectively protect the roller bearings from a wide range of debris types. The large front rollers are greaseable to help purge water and debris and use snap rings to ensure bearings stay in place, increasing durability and longevity of the front rollers.

• Rear-discharge design provides premium cut quality and dispersal for less clumping and blowing for cleanup

The 9009A and 7400A TerrainCut™ Mowers 68.6-cm (27-in.) deck features a deck design with an asymmetric rear discharge cutout and molded chute to promote better airflow, leading to improved clipping dispersal and cut quality.

The unique shape of the deck shell cutout includes a heavily rounded opening on one side that gradually transitions to a larger opening on the other side of the cutout, allowing the grass to exit the deck evenly while significantly reducing the possibility of the deck congestion. This design incorporates deck structure along the bottom of the discharge area that reduces sound power, does not affect cut quality negatively, and acts as a foot guard eliminating the need for an external guard that can lead to external grass build up which can be dropped in the mowing pass over time.

When the asymmetric deck shell discharge shape is used in combination with the asymmetric discharge chute, this deck outperforms the competition in cut quality by minimizing clumping with smooth transitions and guiding the discharge material in a more dispersed pattern.

The improved dispersal will lead to less clean up and blowing, allowing machines to mow earlier in the day while saving time and reducing labor.

The proper blade selection for heights of grass, grass type, and sharp blades are keys to improved cut quality and dispersal. The removal of no more than one third of the grass blade is recommended. During heavy growth times it may require changing blades, mowing more often or raising the height of cut to improve clipping dispersal.

• eHydro™ hydrostatic pump and large-capacity wheel motors for serious hill-climbing capabilities and lower maintenance

The 9009A TerrainCut and the 8900A PrecisionCut utilizes the same eHydro traction pump and wheel motors in the A-model take performance, traction, and operation to the next level. This is combined with the standard GRIP system that reduces wheel slip by sending flow from the front wheel to the opposite rear wheel.

The system is designed to take on the most challenging course conditions ideal for undulating terrain, providing superior performance and traction out on the course.

The traction system in the A-models is driven by a servo-controlled hydrostatic pump. The control of the pump is no longer mechanical linkages, but instead it is electronic. The design reduced the complexity of the drive system meaning no more linkages to adjust or repair decreased routine maintenance and providing reliable day-in/day-out operation.

The end result is more options for mowing different terrain then just straight up and down. The standard GRIP system ensures that when mowing slopes on an angle the high side tire maintains tractions unlike like mechanical systems used on other rough mowers. This increases productivity in tight areas and reduces damage to turf from wheel slippage.

• Tooled notch adjustment system makes height-of-cut (HOC) changes a breeze

One common element among John Deere golf mowing products, reel or rotary, is that adjustments are quick and easy. The 74000A, 8800A, and 9009A TerrainCut™ Rough, Trim, and Surrounds Mowers are no different. All HOC adjustments can be performed with simple tools utilizing an innovative notch system.

Height of cut changes on rotary decks are infrequent adjustments, and customer feedback has been that they prefer a system that utilizes tools with more positive clamp load to stay engaged and keep height of cut consistent in tough conditions.  With the tooled design, there are no hand-engaged latches that may loosen over time.  Instead, a bolt and nut are used to more positively clamp the adjustment in place.  The deck still utilizes the notch system with a pointer and numbered indicators for the height of cut.

To adjust the deck, (2) 15 mm wrenches or sockets will be required, one to loosen the nut on the inside of the adjuster and the second to hold the bolt head.  The system only needs to be loosened enough to disengage the teeth from the notches, but does not need to be completely removed to perform the adjustments. This allows the rollers to rotate upward and downward freely and easily.

Locate the HOC indicator on the inside of the adjuster arm and line up the tabs or use the top edge of the adjuster arm to line up the height on the gauge located on the outside. Re-engage the notches and re-tighten.

The adjustments must be performed on both the front and rear roller, and both rollers have the same adjustment process. A HOC label is also located on the rear of the deck to serve as a guide for setting the height of cut.

The HOC is adjustable 1.9 cm (3/4 in.) to 10.2 cm (4 in.), in 0.64-cm (1/4-in.) increments.